User Tools

Site Tools


en:mainmenu:settings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en:mainmenu:settings [2020/10/22 21:27] – [Map lines customization] lineflyeren:mainmenu:settings [2022/04/22 11:34] (current) – [Map Content] Link to cache marker page for D/T icons lineflyer
Line 1: Line 1:
 ====== c:geo Settings ====== ====== c:geo Settings ======
  
-{{:ic_menu_preferences.png?nolink&50 |}}+{{:ic_menu_preferences.svg?nolink&50 |}}
  
 The following pages describe the functions of the setting menu in c:geo.\\ \\ \\ The following pages describe the functions of the setting menu in c:geo.\\ \\ \\
  
-You can access the settings by clicking on the menu button (three dot button) in the upper right of the main menu and selecting ''Settings'':+You can access the settings by tapping on the menu button (three dot button) in the upper right of the main menu and selecting ''Settings'':
  
-{{:en:settings_1_en.png?direct&250 |}}{{:en:settings_2_en.png?direct&250|}}+{{:en:settings_1_en.png?direct&300 |}}{{:en:settings_2_en.png?direct&300|}}
  
 In this menu you will find the following categories of settings which will be described below in detail: In this menu you will find the following categories of settings which will be described below in detail:
Line 18: Line 18:
 |{{:settings_pen_black.png?nolink|}}|[[settings#logging|Logging]]|Customize logging options and create or modify your logging signature| |{{:settings_pen_black.png?nolink|}}|[[settings#logging|Logging]]|Customize logging options and create or modify your logging signature|
 |{{:settings_sdcard_black.png?nolink|}}|[[settings#offline_data|Offline Data]]|Configure the data to be saved for offline use, the storage location and directories for GPX files.| |{{:settings_sdcard_black.png?nolink|}}|[[settings#offline_data|Offline Data]]|Configure the data to be saved for offline use, the storage location and directories for GPX files.|
-|{{:settings_arrow_black.png?nolink|}}|[[settings#navigation|Navigation]]|Select your default navigation and set other external navigation apps|+|{{:settings_arrow_black.png?nolink|}}|[[settings#navigation|Routing / Navigation]]|Configure offline routing, chose preferred navigation methods  and select external navigation apps|
 |{{:settings_nut_black.png?nolink|}}|[[settings#system|System]]|Configure app directories and other system specific settings| |{{:settings_nut_black.png?nolink|}}|[[settings#system|System]]|Configure app directories and other system specific settings|
 |{{:settings_backup_white.png?nolink|}}|[[settings#backup|Backup & Restore]]|Perform backup and restore of cache/waypoint data and program settings| |{{:settings_backup_white.png?nolink|}}|[[settings#backup|Backup & Restore]]|Perform backup and restore of cache/waypoint data and program settings|
Line 27: Line 27:
 {{anchor:geocaching:}} {{anchor:geocaching:}}
  
-{{:en:services_1_en.png?direct&300 |}}{{:en:services_2_en.png?direct&300|}}+{{ :en:services_1_en.png?direct&400 |}}
  
 In the first section of the service settings you can configure the connection to the different supported geocaching platforms. In the first section of the service settings you can configure the connection to the different supported geocaching platforms.
Line 47: Line 47:
 </WRAP> </WRAP>
  
-Furthermore you can use the service menu to configure the connection to the following additional services, which are available in c:geo afterwards::+Furthermore you can use the service menu to configure the connection to the following additional services, which are available in c:geo afterwards: 
 + 
 +{{ :en:services_2_en.png?direct&400 |}}
  
 ^ Service ^ Description ^ ^ Service ^ Description ^
Line 59: Line 61:
 {{ :en:services_twitter_1.png?direct&400 |}} {{ :en:services_twitter_1.png?direct&400 |}}
  
-You can authorize c:geo to post on [[https://www.twitter.com|Twitter]] each time you send a log for a cache or trackable. After clicking on the ''Twitter'' button the authorization screen will be shown:+You can authorize c:geo to post on [[https://www.twitter.com|Twitter]] each time you send a log for a cache or trackable. After tapping on the ''Twitter'' button the authorization screen will be shown:
  
 {{ :en:services_twitter_2.png?direct&400 |}} {{ :en:services_twitter_2.png?direct&400 |}}
  
-To authorize to Twitter activate the service and click on ''Authorize c:geo''.+To authorize to Twitter activate the service and tap on ''Authorize c:geo''.
 Below the authorization buttons you can modify the templates which are used to post a message on Twitter. This template uses the same [[settings#placeholder_templates|Placeholder templates]] as in your [[settings#logging|logging signature]]. Below the authorization buttons you can modify the templates which are used to post a message on Twitter. This template uses the same [[settings#placeholder_templates|Placeholder templates]] as in your [[settings#logging|logging signature]].
  
 {{ :en:services_twitter_3.png?direct&400 |}} {{ :en:services_twitter_3.png?direct&400 |}}
  
-On the following page, click on ''Start authorization'' to open the Twitter web page, where you have to enter your twitter username and password and afterwards agree to allow c:geo to post on Twitter on your behalf.+On the following page, tap on ''Start authorization'' to open the Twitter web page, where you have to enter your twitter username and password and afterwards agree to allow c:geo to post on Twitter on your behalf.
  
  
Line 94: Line 96:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Light Skin|When activated c:geo is using black letters on white background instead of the default white letters on black background. //(Default: Deactivated)//| +|Theme|You can choose to use c:geo with a light or dark theme or let the theme follow your system setting.//(Default: Dark)//| 
-|Transparent background|When activated the main screen of c:geo is transparent showing your desktop wallpaper as a background. //(Default: Activated)//|+|Wallpaper|You can choose to use your device wallpaper also as background on the c:geo home screen //(Default: Deactivated)//|
 |Show Address|When activated c:geo will use a reverse geocoding service to show the current location name instead of the location coordinates at the bottom of the main screen. //(Default: Activated)//| |Show Address|When activated c:geo will use a reverse geocoding service to show the current location name instead of the location coordinates at the bottom of the main screen. //(Default: Activated)//|
 |Plain Logs|Activating this setting will show all log entries without the custom colors for enhanced readability. //(Default: Deactivated)//| |Plain Logs|Activating this setting will show all log entries without the custom colors for enhanced readability. //(Default: Deactivated)//|
-|Use English|This will force c:geo to use the English user interface instead using your individual phone language. This might be helpful in case you have problems with wrong translations in your language. A restart of c:geo is required after you modified this setting. //(Default: Deactivated)// \\ \\ :!: Be aware that activating the ''Use English'' option will also show all dates in US format (M/D/YYYY). \\ Additionally this feature will no longer work starting with Android 8 due to technical changes in Android.|+|Select language|This setting allows you to manually set the used language for c:geo. This might be helpful in case you have problems with wrong translations in your language. A restart of c:geo is required after you modified this setting. //(Default: Use default language of the device)//|
 |Use Imperial Units|Activating this option will make c:geo use imperial units (miles/feet) instead of metric units (meter/kilometer) on all relevant screens. //(Default: Activated (for languages en-us), Deactivated (for all other languages)//| |Use Imperial Units|Activating this option will make c:geo use imperial units (miles/feet) instead of metric units (meter/kilometer) on all relevant screens. //(Default: Activated (for languages en-us), Deactivated (for all other languages)//|
  
Line 108: Line 110:
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
 | Show Friends'/Own|Activating this option will show an additional logbook page in the details of each cache, which contains all your own logs of this cache as well as all the logs of your geocaching friends (based on the friend function of geocaching.com). //(Default: Activated)//| | Show Friends'/Own|Activating this option will show an additional logbook page in the details of each cache, which contains all your own logs of this cache as well as all the logs of your geocaching friends (based on the friend function of geocaching.com). //(Default: Activated)//|
-|Last Details Page|When deactivated the cache details will always open with the page ''Details'' while activating this function will remember the last opened page and open any new caches on this page (e.g. Waypoints). //(Default: Deactivated)//|+|Last Details Page|When deactivated the cache details will always open with the page ''Details'' while activating this function will remember the last opened page and open any new caches on this page (e.g. waypoints). //(Default: Deactivated)//|
 |Show Direction|This function will show small directional arrows in all cache lists, providing coarse information about the direction of a cache relative to your device.\\ While this may help to figure out if a cache is e.g. in front or behind you, it is not designed to replace the other navigation methods in c:geo. //(Default: Activated)// \\ \\ :!: Please be aware, that for basic members of geocaching.com this function will in search results only show static direction images, but no moving arrows.| |Show Direction|This function will show small directional arrows in all cache lists, providing coarse information about the direction of a cache relative to your device.\\ While this may help to figure out if a cache is e.g. in front or behind you, it is not designed to replace the other navigation methods in c:geo. //(Default: Activated)// \\ \\ :!: Please be aware, that for basic members of geocaching.com this function will in search results only show static direction images, but no moving arrows.|
-|Exclude Own and Found|Activating this item will hide caches you own or have already found in all online functions of c:geo. Owned and found caches will however still be shown in your saved lists of caches.| +|Disable waypoint extraction|Enabling this setting will **globally** deactivate the feature of automatic waypoint generation for coordinates found in your personal caches notes. Alternatively you can disable the feature individually for a cache by deactivating the checkbox directly below the personal cache note.| 
-|Exclude Disabled|This will hide temporarily disabled caches in all online functions of c:geo. Disabled caches will however still be shown in your saved lists of caches.| +|Overwrite personal cache note|Activating this setting will cause all personal notes to be overwritten by the server content instead of being merged with the local content when refreshing caches.\\ \\ :!: Activating this option might lead to data loss in your notes. Be careful.| 
-|Exclude Archived|This will hide archived caches on the map. Archived caches will however still be shown in your saved lists of caches.| +|Use Chrome Webview|External website will be shown in a chrome webview window directly in c:geo instead of opening your external device browser.\\ \\ :!: This function requires Google Chrome to be installed on your device.|
-|Waypoint Extraction|Enabling this setting will **globally** deactivate the feature of automatic waypoint generation for coordinates found in your personal caches notes. Alternatively you can disable the feature individually for a cache by deactivating the checkbox directly below the personal cache note.|+
 ===== Map ===== ===== Map =====
 {{anchor:map:}} {{anchor:map:}}
Line 123: Line 124:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Select Map Source|This allows you to define the map, which shall be used in all map functions of c:geo. The menu will contain all available online maps as well as the offline map files found in your offline map directory. \\ You can change this setting also directly from the live map by clicking the map layer icon and selecting another [[..mapsources|map source]].| +|Select Map Source|This allows you to define the map, which shall be used in all map functions of c:geo. The menu will contain all available online maps as well as the offline map files found in your offline map directory. \\ You can change this setting also directly from the live map by tapping the map layer icon and selecting another [[..mapsources|map source]].| 
-|Info on Offline Maps|This info item will provide you more detailed information about supported [[..offline#offline_maps|offline map]] formats and a link to our [[http://faq.cgeo.org|FAQ]].| +|Info on Offline Maps|This info item will provide you more detailed information about supported [[..offline#offline_maps|offline map]] formats and a link to the [[..:offlinemaps|offline map tutorial]] in this user guide.
-|Directory with offline maps|Here you can configure the directory, which contains your Mapsforge [[..offline#offline_maps|offline map]] files.\\ \\ :!: The automatic scan might not be able to search in all directories/storage. In case your map directory is not found automatically, please use the ''Choose directory'' button shown after the scan is completed.| +|Download offline map|This will open the c:geo map downloader, where you can download new offline maps from various sources or update already installed mapsDetails are described in [[..:offlinemaps|the offline map tutorial]] of this user guide.| 
-|Info on Map Themes|This info item will provide you more detailed information about supported offline map themes and a link to our [[http://faq.cgeo.org|FAQ]].|+|Directory with offline maps|Here you can configure the directory, which contains your Mapsforge [[..offline#offline_maps|offline map]] files.| 
 +|Info on Map Themes|This info item will provide you more detailed information about supported offline map themes and some more hints for best practice.|
 |Map Themes Directory|Here you can configure the directory, which contains your offline map themes.| |Map Themes Directory|Here you can configure the directory, which contains your offline map themes.|
-|Scale Map Text|This option allows scaling the text labels of your offline maps depending on your device display resolutionActivating it will help to get the text more readable on devices with rather high display resolution.//(DefaultActivated)//|+|Synchronize themes|In case you experience a slow performance when opening the map, you can use this option to synchronize your theme folder into an app private storageThis will increase the access speed but consume bit more data storage.\\ \\ :!: Please make sure your theme folder does not contain any unrelated (large amount ofdata before enabling this feature!|
 |Map rotation (Google Maps)|You can switch rotation of the map according to device heading off/on or enable manual rotation.\\ \\ :!: This function is currently only available for Google Maps.| |Map rotation (Google Maps)|You can switch rotation of the map according to device heading off/on or enable manual rotation.\\ \\ :!: This function is currently only available for Google Maps.|
  
Line 141: Line 143:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-| Show Waypoints |Here you can set the limit for showing waypoints of (saved) caches on the map.\\ If less than the selected amount of caches are displayed on the visible map area, their waypoints are shown additionally. You can either use the slider to set the value or click on the number to set a new value. //(Default: 20)//|+| Show Waypoints |Here you can set the limit for showing waypoints of (saved) caches on the map.\\ If less than the selected amount of caches are displayed on the visible map area, their waypoints are shown additionally. You can either use the slider to set the value or tap on the number to set a new value. //(Default: 10)//|
 | Hide Waypoints |These sub items allow to hide certain waypoint types on the map:\\ 1. Hide original waypoints: If a cache has modified listing coordinates assigned and thus a waypoint automatically created, which contains the original listing coordinates, this function will hide this original coordinate waypoint.\\ 2. Hide parking waypoints: Enabling this option will hide all waypoints of the type “Parking”.\\ 3. Hide visited waypoints: Enabling this option will hide all waypoints, which are marked as visited by the user in c:geo.\\ //(Default: All off)//| | Hide Waypoints |These sub items allow to hide certain waypoint types on the map:\\ 1. Hide original waypoints: If a cache has modified listing coordinates assigned and thus a waypoint automatically created, which contains the original listing coordinates, this function will hide this original coordinate waypoint.\\ 2. Hide parking waypoints: Enabling this option will hide all waypoints of the type “Parking”.\\ 3. Hide visited waypoints: Enabling this option will hide all waypoints, which are marked as visited by the user in c:geo.\\ //(Default: All off)//|
 | Zoom includes waypoints |If this setting is enabled the zoom level will include all waypoints of a cache, if you open a map for a single cache. //(Default: Off)//| | Zoom includes waypoints |If this setting is enabled the zoom level will include all waypoints of a cache, if you open a map for a single cache. //(Default: Off)//|
Line 150: Line 152:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Show direction|Activating this option will show a directional line (or a routed line if routing options are installed) on the map between your current position and the navigation target.\\ You can activate the direction line by opening the map for a single cache or selecting a cache on the map and activating the feature in the cache popup window now shown on the map (the latter is only applicable for offline maps). //(Default: Activated)//| 
 |Show history track|With this option you can activate a track showing your position history (your movement) on the map. //(Default: Deactivated)// \\ \\ :!: Please be aware, that this will only be accurate as long as you use the map and have GPS enabled and will have gaps or jumps in case you switch your device to standby or deactivate GPS. If you would like a more reliable track recording you should rather use a specialized app.| |Show history track|With this option you can activate a track showing your position history (your movement) on the map. //(Default: Deactivated)// \\ \\ :!: Please be aware, that this will only be accurate as long as you use the map and have GPS enabled and will have gaps or jumps in case you switch your device to standby or deactivate GPS. If you would like a more reliable track recording you should rather use a specialized app.|
 |History track max. length| Allows to raise the amount of track points available for the history track. Once the limit is reached the oldest recorded points will be removed if new points are recorded. Raising the limit however allocates more memory. //(Default: 700 points)//| |History track max. length| Allows to raise the amount of track points available for the history track. Once the limit is reached the oldest recorded points will be removed if new points are recorded. Raising the limit however allocates more memory. //(Default: 700 points)//|
-|Calculate route|With this setting you can select the maximum distance up to which a route is calculated and shown on the map between your position and the selected cache. You can either use the slider to set the value or click on the number to set a new value. //(Default: 10km)// \\ \\ :!: This function requires the [[.:utilityprograms|Brouter helper app]] to be installed on your device.+|Big icons for logged caches|If enabled the map will show big emoticons for logged caches instead of the cache type iconA restart is required after changing this setting. //(Default: Deactivated)//
-|Show straight distance|If the setting is active, the straight distance to the target will be shown additionally to the routed distance while routing is active. //(Default: Deactivated)//|+|D/T rating on icons|Once activated all cache type icons will have a small overlay indicating the caches D/T-rating. You will find an explanation of those markers on the [[..:cachemarkers|cache marker page]] of this user guide.|
 ==== Map behavior ==== ==== Map behavior ====
 {{anchor:map_behavior}} {{anchor:map_behavior}}
  
-{{:en:settings_maps_mapbehavior.png?direct&400 |}}+{{ :en:settings_maps_mapbehavior.png?direct&400 |}}
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Long tap on map|If enabled you can long click/tap on the map for two purposes:\\ 1. Long click on a cache or waypoint will add this cache/waypoint to your [[en:individualroute|indiviudal route]].\\ 2. Long click on the map will trigger creation of a [[en:udc|user defined cache]]. //(Default: Deactivated)//|+|Long tap on map|If enabled you can long tap on the map for two purposes:\\ 1. Long tap on a cache or waypoint will add this cache/waypoint to your [[.livemap#individual_route|individual route]].\\ 2. Long tap on the map will trigger creation of a [[en:udc|user defined cache]]. //(Default: Deactivated)//|
 ==== Proximity Notification ==== ==== Proximity Notification ====
 {{anchor:proximity:}} {{anchor:proximity:}}
Line 168: Line 169:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Far distance|Defines the far distance for the proximity notification. You can either use the slider to set the value or click on the number to set a new value.| +|Far distance|Defines the far distance for the proximity notification. You can either use the slider to set the value or tap on the number to set a new value.| 
-|Near distance|Defines the near distance for the proximity notification. You can either use the slider to set the value or click on the number to set a new value.|+|Near distance|Defines the near distance for the proximity notification. You can either use the slider to set the value or tap on the number to set a new value.|
 |General proximity notification on map|When enabled a single notification beep is issued if any cache or waypoint on the map comes closer than far or near distance. When reaching the far distance a single beep is issued, when reaching near distance a triple beep is issued. //(Default: Deactivated)//| |General proximity notification on map|When enabled a single notification beep is issued if any cache or waypoint on the map comes closer than far or near distance. When reaching the far distance a single beep is issued, when reaching near distance a triple beep is issued. //(Default: Deactivated)//|
 |Specific waypoint proximity notification|When enabled a repeated notification beep is issued if the currently selected cache or waypoint comes closer than far or near distance. This works if cache or waypoint details are opened, cache or waypoint popup on the map are shown or the compass is active. When reaching the far distance a single beep is issued, when reaching near distance a triple beep is issued. //(Default: Deactivated)//| |Specific waypoint proximity notification|When enabled a repeated notification beep is issued if the currently selected cache or waypoint comes closer than far or near distance. This works if cache or waypoint details are opened, cache or waypoint popup on the map are shown or the compass is active. When reaching the far distance a single beep is issued, when reaching near distance a triple beep is issued. //(Default: Deactivated)//|
Line 194: Line 195:
 |History track|If the history track is activated in [[.settings#map_content|map content settings]] a track of your movement will be drawn on the map.| |History track|If the history track is activated in [[.settings#map_content|map content settings]] a track of your movement will be drawn on the map.|
 |Direction line|The direction line is a straight or specific routed navigation path (if the [[.utilityprograms|BRouter]] app is installed) from your current position towards a selected cache or waypoint (navigation target).| |Direction line|The direction line is a straight or specific routed navigation path (if the [[.utilityprograms|BRouter]] app is installed) from your current position towards a selected cache or waypoint (navigation target).|
-|Individual route|An individual route is a collection of caches or waypoints you selected sequentially by long clicking them on the map. This function can be used to plan your caching trips by drawing a route from one cache/waypoint to another. The long click function needs to be enabled in [[.settings#map_behavior|map behavior settings]].| +|Individual route|An individual route is a collection of caches or waypoints you selected sequentially by long tapping them on the map. This function can be used to plan your caching trips by drawing a route from one cache/waypoint to another. The long tap function needs to be enabled in [[.settings#map_behavior|map behavior settings]].| 
-|Individual track|The individual track is a track or route you imported from a GPX file in the [[.livemap#top_bar_menu|live map menu]]. It can be used to visualize a given track you want to follow.|+|GPX track/route|The GPX track/route you imported from a GPX file in the [[.livemap#top_bar_menu|live map menu]]. It can be used to visualize a given track you want to follow.|
 |Circle|If activated in the [[.livemap#map_settings|map setting menu on the map]] c:geo will show circles with a distance of 1/10 mile (161 meters) around all physical waypoints (i.e. traditional caches, physical stages of a cache, mystery caches with corrected coordinates). This is the minimum distance placed caches need to have on geocaching.com and these circle might be helpful when you are planning to hide a new cache and are looking for a position.| |Circle|If activated in the [[.livemap#map_settings|map setting menu on the map]] c:geo will show circles with a distance of 1/10 mile (161 meters) around all physical waypoints (i.e. traditional caches, physical stages of a cache, mystery caches with corrected coordinates). This is the minimum distance placed caches need to have on geocaching.com and these circle might be helpful when you are planning to hide a new cache and are looking for a position.|
 +|Accuracy circles|This is a small circle drawn around your current position. It represents the uncertainty of your GPS position.|
  
  
-==== Mapsforge API ==== +==== Other map settings ==== 
-{{anchor:mapsforge_api:}}+{{anchor:other:}}
  
-{{ :en:settings_maps_mapsforgeapi.png?direct&400 |}}+{{ :en:settings_maps_other.png?direct&400 |}}
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Old Mapsforge V3|Since June 2018 c:geo supports a newer version of the Mapsforge libraries. As some functions of these new libraries are still under development, you can revert back to the old Mapsforge v3 libraries by activating this option in case of need.\\ It is however highly recommended to use the newer libraries due to a wider support of offline maps and better performance. //(Default: Deactivated)//|+|Multi-threaded (OSM)|When activated the OSM map renderer uses multiple threads on your device processor to render the map. This will speed up map drawing but might in rare cases lead to drawing problems. It should be deactivated if you encounter problems in map display. //(Default: Deactivated)//|
  
 ===== Logging ===== ===== Logging =====
Line 216: Line 218:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Signature|Clicking this option will open a text window where you can define your custom signature template appended to each log you compose with c:geo.\\ In the editor you can click on ''Insert Template'' to get a list of possible placeholder templates you can use in your logs (see detailed table below).|+|Signature|Tapping this option will open a text window where you can define your custom signature template appended to each log you compose with c:geo.\\ In the editor you can tap on ''Insert Template'' to get a list of possible placeholder templates you can use in your logs (see detailed table below).|
 |Insert automatically|Activating this item will automatically insert the custom signature into your log text when you start logging a cache with c:geo.\\ If this option is deactivated you can still insert your signature manually on demand by selecting ''+'' and ''Signature'' while composing your log. //(Default: Deactivated)//| |Insert automatically|Activating this item will automatically insert the custom signature into your log text when you start logging a cache with c:geo.\\ If this option is deactivated you can still insert your signature manually on demand by selecting ''+'' and ''Signature'' while composing your log. //(Default: Deactivated)//|
 +|Log template|In this section you can add/modify/remove custom templates for your log text. The templates defined here can then be inserted when logging a cache or trackable.|
  
 === Placeholder Templates === === Placeholder Templates ===
Line 246: Line 249:
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
 |Visit TBs|Enabling this option will automatically set all Trackables in your inventory as ''Visited'' when logging a cache. //(Default: Deactivated)//| |Visit TBs|Enabling this option will automatically set all Trackables in your inventory as ''Visited'' when logging a cache. //(Default: Deactivated)//|
-|Offline Logging|Using this function will activate a ''One click offline log'' function replacing the normal logging screen. It can be used to easily generate offline logs/field notes.\\ The normal logging screen will still be available as a sub menu of the ''One click offline log'' menu. //(Default: Deactivated)//+|Offline Logging|Using this function will activate a ''One tap offline log'' function replacing the normal logging screen. It can be used to easily generate offline logs/field notes.\\ The normal logging screen will still be available as a sub menu of the ''One tap offline log'' menu. //(Default: Deactivated)//
-|Show offline logs|An offline log counter (e.g. "+1") will be shown next to your offline find count on the [[.start#login_status|home screen]], if you have found logs, that are not submitted yet.|+|Show offline logs|An offline log counter (e.g. "+1") will be shown next to your online find count on the [[.start#login_status|home screen]], if you have found logs, that are not submitted yet.|
  
 <WRAP center round tip 100%> <WRAP center round tip 100%>
Line 268: Line 271:
 |Ask for List|When activated you will be asked in which list the cache shall be saved if you store a cache in c:geo. If it is deactivated all caches will be stored to the default list. //(Default: Activated)//| |Ask for List|When activated you will be asked in which list the cache shall be saved if you store a cache in c:geo. If it is deactivated all caches will be stored to the default list. //(Default: Activated)//|
 |Additional lists|If this option is activated c:geo will show all additional lists, on which a certain cache is stored in c:geo, on your cache lists. //(Default: Deactivated)//| |Additional lists|If this option is activated c:geo will show all additional lists, on which a certain cache is stored in c:geo, on your cache lists. //(Default: Deactivated)//|
 +|List load limit|You can use this function if you handle rather huge lists of offline stored caches. It will limit the amount of caches initially loaded from the c:geo internal database in order to increase performance. More caches can then be loaded by tapping on "Load more caches" when reaching the end of the list. //(Default:0=No Limitation)//|
  
 ==== GPX ==== ==== GPX ====
Line 275: Line 279:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|GPX Export Directory|Select the directory where GPX file exported from c:geo will be stored. //(Default:/cgeo/gpx)// \\ \\ :!: c:geo must have write permission on the selected directory. Therefore please make sure you select a folder from your internal memory but not from your SD card. | +|GPX Folder|Select the directory where GPX file exported from c:geo will be stored. //(Default:/cgeo/gpx)//|
-|GPX Import Directory|Select the directory where c:geo will search for GPX file to be imported into c:geo.|+
  
 ==== Database and Geocache data ==== ==== Database and Geocache data ====
Line 293: Line 296:
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Delete orphaned files|c:geo stores cache images, log images and other filed related to a cache in a separate directory (refer to [[settings#database_and_geocache_data|Geocache Data Directory]]). In some cases (e.g. restoring a backup) this directory might contain outdated files of caches no longer stored on the device. These outdated data can be deleted by using this function.\\ \\ :!: After deleting caches from your list, the additional geocache data will be cached by c:geo internally for 72hours to avoid re-downloading it in case of a user mistake. Afterwards it will be deleted automatically. There is no need to use this function in this case and it will also make no sense as the data is still kept during the 72 hour period.|+|Delete orphaned files|c:geo stores cache images, log images and other filed related to a cache in a separate directory (refer to [[settings#database_and_geocache_data|Geocache Data Directory]]). In some cases (e.g. restoring a backup) this directory might contain outdated files of caches no longer stored on the device. These outdated data can be deleted by using this function.|
  
  
 ===== Navigation ===== ===== Navigation =====
 {{anchor:navigation:}} {{anchor:navigation:}}
 +
 +==== Offline Routing ====
 +
 +{{ :en:settings_navigation_routing1.png?direct&400 |}}
 +
 +^ Menu item ^ Description ^
 +|Calculate route|With this setting you can select the maximum distance up to which a route is calculated and shown on the map between your position and the selected cache. You can either use the slider to set the value or tap on the number to set a new value. //(Default: 10km)//|
 +|Show straight distance|If the setting is active, the straight distance to the target will be shown additionally to the routed distance while routing is active. //(Default: Deactivated)//|
 +|Use internal routing|Activating this menu option will use the c:geo internal brouter enginge, instead of making use of the external helper app "Brouter". c:geo will then also handle download and regular update of routing tiles. The external app is not needed anymore if this settings is activated.//(Default: Deactivated)//|
 +
 +{{ :en:settings_navigation_routing2.png?direct&400 |}}
 +
 +^ Menu item ^ Description ^
 +|Folder with BRouter routing data|If you use the internal routing engine, this defines the folder where routing tile data will be stored. You can either manually store/move the data into this folder or use the c:geo internal (automatic) downloader to download the needed routing tiles //(Default: Subfolder routing/segments4 below the c:geo base folder)//|
 +|Automatic download|Once activated c:geo will inform you, in case routing tile data for routing request (if you create an individual route or set a waypoint as target) is missing and offer to download it automatically into the folder defined above.//(Default: Deactivated)//|
 +|Update interval|If the automatic download is activated c:geo can also check periodically whether new routing tile data is available on the BRouter server and remind you to perform an update. You can set the update reminder interval here. You can set it to 0 to deactivate the update reminder //(Default: 30)//|
 +|"Walk" profile|You can define which of the available Brouter routing profiles shall be used for the navigation type "Walking"|
 +|"Bike" profile|You can define which of the available Brouter routing profiles shall be used for the navigation type "Bicycle"|
 +|"Car" profile|You can define which of the available Brouter routing profiles shall be used for the navigation type "Car"|
 +==== Navigation Tools ====
  
 {{ :en:settings_navigation.png?direct&400 |}} {{ :en:settings_navigation.png?direct&400 |}}
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Default navigation|You can select your default navigation tool here, which provides you easy and fast access to your preferred navigation method. The selected tool will be started with a **short** click on the compass rose icon at the top of the cache details as well as the map popup window. //(Default: Compass)//+|Default navigation|You can select your default navigation tool here, which provides you easy and fast access to your preferred navigation method. The selected tool will be started with a **short** tap on the compass rose icon at the top of the cache details as well as the map popup window. //(Default: Compass)//
-|Secondary navigation|You can select your secondary preferred navigation tool here, which provides you easy and fast access to this navigation method. The selected tool will be started with a **long** click on the compass rose icon at the top of the cache details as well as the map popup window. //(Default: Map)//|+|Secondary navigation|You can select your secondary preferred navigation tool here, which provides you easy and fast access to this navigation method. The selected tool will be started with a **long** tap on the compass rose icon at the top of the cache details as well as the map popup window. //(Default: Map)//|
 |Navigation menu|This section provides the possibility to activate or deactivate some of the installed and available navigation methods detected by c:geo. You may use it to clean up the cache navigation menu by e.g. disabling navigation methods you are never using. //(Default: All available are activated)//| |Navigation menu|This section provides the possibility to activate or deactivate some of the installed and available navigation methods detected by c:geo. You may use it to clean up the cache navigation menu by e.g. disabling navigation methods you are never using. //(Default: All available are activated)//|
  
Line 315: Line 338:
 {{anchor:various_other_system_settings:}} {{anchor:various_other_system_settings:}}
  
-==== Geolocation & Orientation ==== +==== Base folder, Geolocation & Orientation ==== 
-{{:en:system_other_1.png?direct&400 |}}+{{anchor:base_folder_geolocation_orientation}} 
 + 
 +{{ :en:system_other_1.png?direct&400 |}}
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
 +|Base folder for public local data|Here you can modify the base folder c:geo uses to store all its user accessible data (e.g. GPX-exports, offline logs, offline maps, etc.). \\ :!: We recommend to use ''/cgeo/'' on an internal non-removable storage.|
 |Use Google Play Services|On devices equipped with Google Play Services, c:geo can automatically use a better geo location provider to get better location results and reduce the battery consumption.\\ \\ :!: If you want to use an external Bluetooth GPS receiver you have to disable this option!\\ :!: On some devices Google Play Services are available but not working reliable. If you experience localization problems or no GPS reception at all, try disabling this option.| |Use Google Play Services|On devices equipped with Google Play Services, c:geo can automatically use a better geo location provider to get better location results and reduce the battery consumption.\\ \\ :!: If you want to use an external Bluetooth GPS receiver you have to disable this option!\\ :!: On some devices Google Play Services are available but not working reliable. If you experience localization problems or no GPS reception at all, try disabling this option.|
 |Active low-power mode|The low power mode avoids using GPS and the gyroscope sensor in situations where a highly accurate location is not strictly necessary (e.g. on cache lists) at the cost of longer fixing times once high accuracy is needed again. It can help to enhance battery life in some situations.\\ We however recommend to keep this option switched off to have the highest possible accuracy which is desirable for Geocaching in general. :-)| |Active low-power mode|The low power mode avoids using GPS and the gyroscope sensor in situations where a highly accurate location is not strictly necessary (e.g. on cache lists) at the cost of longer fixing times once high accuracy is needed again. It can help to enhance battery life in some situations.\\ We however recommend to keep this option switched off to have the highest possible accuracy which is desirable for Geocaching in general. :-)|
 |Force use of orientation sensor|On some devices the regular rotation vector sensor behaves erratically, giving the wrong direction when using the c:geo compass. In this case you can activate this option to instead use the orientation sensor, which may provide better results.\\ We recommend to enable this option only in case of compass problems on your device.| |Force use of orientation sensor|On some devices the regular rotation vector sensor behaves erratically, giving the wrong direction when using the c:geo compass. In this case you can activate this option to instead use the orientation sensor, which may provide better results.\\ We recommend to enable this option only in case of compass problems on your device.|
  
-==== Acceleration & Debugging ==== +==== Debugging ==== 
-{{:en:system_other_2.png?direct&400 |}}+{{ :en:system_other_2.png?direct&400 |}}
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
-|Enable hardware acceleration|Hardware acceleration renders graphical elements faster on the screen and thus provides a better experience while using c:geo. However on some devices the operating system contains bugs which can make some text appear blurred (notably bold characters). Disable this option only if this happens to you.| 
 |Activate debug log|c:geo can generate a lot of debugging information needed for development purposes. Please use this feature only in case you are asked to send a log to the c:geo developers or you know what you are doing.\\ \\ :!: Activating this setting will affect the stability of c:geo. Please keep debug logging disabled during normal usage of c:geo!| |Activate debug log|c:geo can generate a lot of debugging information needed for development purposes. Please use this feature only in case you are asked to send a log to the c:geo developers or you know what you are doing.\\ \\ :!: Activating this setting will affect the stability of c:geo. Please keep debug logging disabled during normal usage of c:geo!|
 |Generate logfile|Using this option will generate a system logfile to be send to the c:geo support in case of failures or crashes. Use as advised by c:geo support team (useful in combination with activation of debug log).| |Generate logfile|Using this option will generate a system logfile to be send to the c:geo support in case of failures or crashes. Use as advised by c:geo support team (useful in combination with activation of debug log).|
 |Create memory dump|This is a development function, which can help to debug special problems in the c:geo memory handling. Using this function is nothing helpful for you, but will only spam your internal storage with a rather huge dump file. So better not use it. :-)| |Create memory dump|This is a development function, which can help to debug special problems in the c:geo memory handling. Using this function is nothing helpful for you, but will only spam your internal storage with a rather huge dump file. So better not use it. :-)|
 +|View downloads|Shows all pending background download processes.|
 |View settings|This debug feature opens a view where all c:geo settings can be viewed and edited in a raw format.\\ \\ :!: Changing anything here might result in unwanted behavior or c:geo no longer working. So only use this after explicit request by c:geo support!| |View settings|This debug feature opens a view where all c:geo settings can be viewed and edited in a raw format.\\ \\ :!: Changing anything here might result in unwanted behavior or c:geo no longer working. So only use this after explicit request by c:geo support!|
  
Line 339: Line 365:
 ==== Create Backup ==== ==== Create Backup ====
  
-{{:en:settings_system_backup.png?direct&400 |}}+{{ :en:settings_system_backup.png?direct&400 |}}
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
Line 347: Line 373:
 ==== Restore ==== ==== Restore ====
  
-{{:en:settings_system_backup_program.png?direct&400 |}}+{{ :en:settings_system_backup_program.png?direct&400 |}}
  
 ^ Menu item ^ Description ^ ^ Menu item ^ Description ^
 |Restore|This function will restore the newest available backup. The date/time of the newest backup available will be shown here. In a next step during the restore process you can choose, whether you want to restore the caches and/or the program settings. \\ \\ :!: Restoring a backup will **replace**  all caches and/or app settings by those contained in the backup. Be aware of that, when using this function.| |Restore|This function will restore the newest available backup. The date/time of the newest backup available will be shown here. In a next step during the restore process you can choose, whether you want to restore the caches and/or the program settings. \\ \\ :!: Restoring a backup will **replace**  all caches and/or app settings by those contained in the backup. Be aware of that, when using this function.|
-|Restore different backup|With this menu item you can select another available backup but the newest one to be selected for restoring. After clicking here a directory selector will be shown listing the existing backup directories named with date and time below ''/cgeo/backup/'' as c:geo created them during your backup. Select the directory you want to restore from and press OK to continue with thre restoration process.\\ Optionally you can use the directory chooser to navigate to another location, where you placed your backup files and choose to restore from there.|+|Restore different backup|With this menu item you can select another available backup but the newest one to be selected for restoring. After tapping here a directory selector will be shown listing the existing backup directories named with date and time below ''/cgeo/backup/'' as c:geo created them during your backup. Select the directory you want to restore from and press OK to continue with the restoration process.\\ Optionally you can use the directory chooser to navigate to another location, where you placed your backup files and choose to restore from there.|
  
  
  
  
en/mainmenu/settings.1603394829.txt.gz · Last modified: 2020/10/22 21:27 by lineflyer